RU/2: Forum. Discussion for users and developer OS/2 (eCS). : dmesg


Message list | Post new message | Reply to current | Home Search:
Previous message | Next message
From : Sergey_vl
To : Sergey_vl
Subj : dmesg

Немного дополнительной информации. Вдруг прольёт свет на проблему...

Linux version 2.6.18.1 (root@puppypc) (gcc version 3.4.4) #1 Thu Apr 19 07:47:47 PUP 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000007fffc00 (ACPI data)
BIOS-e820: 0000000007fffc00 - 0000000008000000 (ACPI NVS)
BIOS-e820: 00000000fffe8800 - 0000000100000000 (reserved)
0MB HIGHMEM available.
127MB LOWMEM available.
On node 0 totalpages: 32752
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 28656 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f6de0
ACPI: RSDT (v001 PTLTD RSDT 0x00000001 LTP 0x00000000) @ 0x07ffb07a
ACPI: FADT (v001 IBM 430BX 0x00000001 PTL 0x000f4240) @ 0x07fffb65
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x00000001 LTP 0x00000001) @ 0x07fffbd9
ACPI: DSDT (v001 IBM BT2 0x00000001 MSFT 0x01000007) @ 0x00000000
ACPI: BIOS age (1999) fails cutoff (2002), acpi=force is required to enable ACPI
ACPI: Disabling ACPI support
Allocating PCI resources starting at 10000000 (gap: 08000000:f7fe8800)
Detected 447.699 MHz processor.
Built 1 zonelists. Total pages: 32752
Kernel command line: initrd=initrd.gz pmedia=cd layerfs=aufs BOOT_IMAGE=vmlinuz
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 124536k/131008k available (2414k kernel code, 5920k reserved, 797k data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 895.99 BogoMIPS (lpj=4479996)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
CPU: Intel Pentium III (Coppermine) stepping 01
Checking 'hlt' instruction... OK.
checking if image is initramfs... it is
Freeing initrd memory: 1192k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9c5, last bus=4
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f6e90
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x87d0, dseg 0x400
PnPBIOS: Unknown tag '0x82', length '25'.
PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
SCSI subsystem initialized
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-103f claimed by PIIX4 ACPI
PCI quirk: region 1040-104f claimed by PIIX4 SMB
PIIX4 devres B PIO at 0760-0760
PIIX4 devres E PIO at 03b8-03bf
PIIX4 devres G PIO at 002e-002f
PCI: Firmware left 0000:00:06.0 e100 interrupts enabled, disabling
Boot video device is 0000:01:00.0
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:02.0
pnp: 00:00: ioport range 0x760-0x760 has been reserved
pnp: 00:00: ioport range 0x1050-0x105f has been reserved
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0x1000-0x103f has been reserved
pnp: 00:0b: ioport range 0x1040-0x104f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: f4200000-f47fffff
PREFETCH window: f5000000-f5ffffff
PCI: Bus 2, cardbus bridge: 0000:00:03.0
IO window: 00001800-000018ff
IO window: 00001c00-00001cff
PREFETCH window: 12000000-13ffffff
MEM window: 14000000-15ffffff
PCI: Bus 6, cardbus bridge: 0000:00:03.1
IO window: 00002000-000020ff
IO window: 00002400-000024ff
PREFETCH window: 16000000-17ffffff
MEM window: 18000000-19ffffff
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:03.0
PCI: Sharing IRQ 11 with 0000:00:03.1
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Found IRQ 11 for device 0000:00:03.1
PCI: Sharing IRQ 11 with 0000:00:03.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Setting latency timer of device 0000:00:03.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
Simple Boot Flag at 0x40 set to 0x1
squashfs: version 3.1 (2006/08/19) Phillip Lougher
NTFS driver 2.1.27 [Flags: R/W].
Initializing Cryptographic API
io scheduler noop registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
pnp: Device 00:0f activated.
00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 13824K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:02.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: IBM-DARA-212000, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: CRN-8241B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 23579136 sectors (12072 MB) w/418KiB Cache, CHS=23392/16/63, UDMA(33)
hda: cache flushes not supported
hda: hda1
libata version 2.00 loaded.
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 176k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
usbcore: registered new driver usbfs
usbcore: registered new driver hub
IBM TrackPoint firmware: 0x0b, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input1
USB Universal Host Controller Interface driver v3.0
PCI: Found IRQ 11 for device 0000:00:02.2
uhci_hcd 0000:00:02.2: UHCI Host Controller
uhci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:02.2: irq 11, io base 0x00001060
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
aufs 20070423
fuse init (API version 7.8)
fuse distribution version: 2.6.3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: RRIP_1991A
aufs test_add:397:mount[1355]: uid/gid/perm 0/0/0755 for /pup_ro2 (0/0/01777)
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
piix4_smbus 0000:00:02.3: Found 0000:00:02.3 device
piix4_smbus 0000:00:02.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:02.3 failed with error -1
Yenta: CardBus bridge found at 0000:00:03.0 [1014:0138]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:03.0, mfunc 0x00002000, devctl 0x64
Yenta: ISA IRQ mask 0x0698, PCI irq 11
Socket status: 30000006
Yenta: CardBus bridge found at 0000:00:03.1 [1014:0138]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:03.1, mfunc 0x00002000, devctl 0x64
Yenta: ISA IRQ mask 0x0698, PCI irq 11
Socket status: 30000006
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
PCI: Found IRQ 11 for device 0000:00:06.0
e100: eth0: e100_probe: addr 0xf4100000, irq 11, MAC addr 00:D0:59:01:BC:B0
PCI: setting IRQ 5 as level-triggered
PCI: Found IRQ 5 for device 0000:00:07.0
ESS Solo-1 reset failed
snd_es1938_write_cmd timeout (0x02c6/0x0280)
snd_es1938_write_cmd timeout (0x02b9/0x0280)
snd_es1938_write_cmd timeout (0x022/0x0280)
snd_es1938_write_cmd timeout (0x02c0/0x0280)
snd_es1938_write_cmd timeout (0x02b1/0x0280)
snd_es1938_write_cmd timeout (0x02b1/0x0280)
snd_es1938_write_cmd timeout (0x025f/0x0280)
snd_es1938_write_cmd timeout (0x02c0/0x0280)
snd_es1938_write_cmd timeout (0x02b2/0x0280)
snd_es1938_write_cmd timeout (0x02b2/0x0280)
snd_es1938_write_cmd timeout (0x025f/0x0280)
snd_es1938_write_cmd timeout (0x02d1/0x0280)
gameport: ES1938 is pci0000:00:07.0/gameport0, io 0x1430, speed 1065kHz
pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr.
pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
pcmcia: see pcmcia.html for details.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
Vendor: Model: USB DISK 2.0 Rev: PMAP
Type: Direct-Access ANSI SCSI revision: 04
SCSI device sda: 15124992 512-byte hdwr sectors (7744 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 15124992 512-byte hdwr sectors (7744 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
usb-storage: device scan complete



Thu 14 Dec 2017 01:57 Mozilla/5.0 (X11; Linux i686) AppleWebKit/537.36 (KHTML, lik




Programmed by Dmitri Maximovich, Dmitry I. Platonoff, Eugen Kuleshov.
25.09.99 (c) 1999, RU/2. All rights reserved.
Rewritten by Dmitry Ban. All rights ignored.