RU/2: Форум. Общение пользователей и разработчиков OS/2 (eCS). : Ответить на сообщение
Имя:
e-mail:
FIDO:
Home page:
сохранить данные о вас
Тема:
> > > При запуске ACPI драйвер говорит "Unsupported kernel detected". > > > Как следствие загрузиться в ком.не удалось. > > > > Есть ещё такой ход конём -- поставить ядро OS/4. В принципе, у меня на х61 с ним всё работает не хуже, чем со стандартным от ArcaOS, вот только нубук не выключается, ибо там пока родного apm.add нет... > > Попробовал поставить OS4 загрузившись с флекши. Не получилось. Пришлось переустанавливать систему. Поставил пока ArcaOS 5.01 > Все бы ни чего но при попытке обновить eCoRT-WPS-20171113.wpi получается занимательный эффект. Рабочий стол грузиться, после чего закрывается и снова грузиться. И так бесконечно. Видео на несколько секунд можно посмотреть тут https://yadi.sk/i/g-_xIvIB3YeDk8 > > Не могу настроить сеть. Какие у тебя стоят. > Так же молчит звук. > Pci.exe говорит следующее > > Bus 0 (PCI Express), Device Number 25, Device Function 0 > Vendor 8086h Intel Corporation > Device 1049h 82566MM Gigabit Network Connection > Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) > Status 0010h (Has Capabilities List, Fast Timing) > Revision 03h, Header Type 00h, Bus Latency Timer 00h > Self test 00h (Self test not supported) > PCI Class Network, type Ethernet > Subsystem ID 20DE17AAh Unknown > Subsystem Vendor 17AAh Lenovo > Address 0 is a Memory Address (0-4GiB) : FE000000h..FE01FFFFh > Address 1 is a Memory Address (0-4GiB) : FE025000h..FE025FFFh > Address 2 is an I/O Port : 1840h..185Fh > System IRQ 20, INT# A > New Capabilities List Present: > Power Management Capability, Version 1.1 > Does not support low power State D1 or D2 > Supports PME# signalling from mode(s) D0, D3hot, D3cold > PME# signalling is currently disabled > 3.3v AUX Current required : 0 mA (Self powered) > Current Power State : D0 (Device operational, no power saving) > 1300 mW D0 power consume > 1300 mW D0 power dissipate > 100 mW D3 power consume > 100 mW D3 power dissipate > 0 mW common logic power consume > Message Signalled Interrupt Capability > MSI is disabled > MSI function can generate 64-bit addresses > > > Bus 3 (PCI Express), Device Number 0, Device Function 0 > Vendor 8086h Intel Corporation > Device 4227h PRO/Wireless 3945ABG [Golan] Network Connection > Command 0106h (Memory Access, BusMaster, System Errors) > Status 0010h (Has Capabilities List, Fast Timing) > Revision 02h, Header Type 00h, Bus Latency Timer 00h > Self test 00h (Self test not supported) > Cache line size 64 Bytes (16 DWords) > PCI Class Network, type Other > Subsystem ID 10118086h Unknown > Subsystem Vendor 8086h Intel Corporation > Address 0 is a Memory Address (0-4GiB) : DFCFF000h..DFCFFFFFh > System IRQ 17, INT# A > New Capabilities List Present: > Power Management Capability, Version 1.1 > Does not support low power State D1 or D2 > Supports PME# signalling from mode(s) D0, D3hot, D3cold > PME# signalling is currently disabled > 3.3v AUX Current required : 0 mA (Self powered) > Current Power State : D0 (Device operational, no power saving) > Message Signalled Interrupt Capability > MSI is disabled > MSI function can generate 64-bit addresses > PCI Express Capability, Version 1 > Device/Port Type : > Legacy PCI Express Endpoint Device > Device Capabilities : > Unsupported Request Severity is Fatal > Device Status : > Correctable Error Detected > Non-Fatal Error Detected > Unsupported Request Detected > AUX Power Detected > Link Capabilities : > Maximum Link speed : 2.5Gb/s > Maximum Link Width : x1 > Link Port Number : 0 > Link Control : > Common Clock Configuration In Use > Link Status : > Current Link speed : 2.5Gb/s > Current Link Width : x1 > > Bus 0 (PCI Express), Device Number 27, Device Function 0 > Vendor 8086h Intel Corporation > Device 284Bh 82801H (ICH8 Family) HD Audio Controller > Command 0106h (Memory Access, BusMaster, System Errors) > Status 0010h (Has Capabilities List, Fast Timing) > Revision 03h, Header Type 00h, Bus Latency Timer 00h > Self test 00h (Self test not supported) > Cache line size 64 Bytes (16 DWords) > PCI Class Multimedia, type Unknown! > Subsystem ID 20AC17AAh Unknown > Subsystem Vendor 17AAh Lenovo > Address 0 is a Memory Address (64-bit) : FE020000h..FE023FFFh > System IRQ 17, INT# B > New Capabilities List Present: > Power Management Capability, Version 1.1 > Does not support low power State D1 or D2 > Supports PME# signalling from mode(s) D0, D3hot, D3cold > PME# signalling is currently disabled > 3.3v AUX Current required : 55 mA > Current Power State : D0 (Device operational, no power saving) > Message Signalled Interrupt Capability > MSI is enabled > MSI function can generate 64-bit addresses > PCI Express Capability, Version 1 > Device/Port Type : > Root Complex Integrated Endpoint Device > Unsupported Request Severity is Non-Fatal > Device Status : > AUX Power Detected > Link Capabilities : > Maximum Link speed : Unknown (00h)!! > Maximum Link Width : xReserved > Link Port Number : 0 > Link Control : > Asynchronous Clocking in Use > Link Status : > Current Link speed : Unknown (00)!! > Current Link Width : x0
__, _,_ _, __, ___,
|_) | | | |_ ` /
| \ | | | , | /
~ ~ `~' ~~~ ~~~ ~~~
Programmed by
Dmitri Maximovich
,
Dmitry I. Platonoff
,
Eugen Kuleshov
.
25.09.99 (c) 1999,
RU/2
. All rights reserved.
Rewritten by
Dmitry Ban
. All rights ignored.